Skip to main content

Bajaj Pulsar RS200 Mileage = 42 kmpl

Today I completed a continuous drive on my RS200 (2015 version) from my home to UP which spanned to about 446 KMs.

So just to give an update on mileage, calculations are as following:

Petrol used : 11 Litres,
Distance covered : 446 KM,
Mileage: 446/11 ~= 42 KM/Litre (I am stunned by performance),
Top Speed: 131-134 Km/Hr (I was scared to lift it above this, wanted to reach safely to destination, road = Yamuna Expressway)
Age of bike: 2 years 6 months
Last Service: A day before this journey
Cost of Trip: 800(petrol)+205(Toll) = 1005 INR




Labels:

Comments

  1. UnknownMay 6, 2018 at 1:13 PM

    This is very nice post, there is some important blog to learn Lotus Notes, please checkout more information on this this site for Lotus Notes lotus notes consultant

    ReplyDelete

Post a Comment

Popular posts from this blog

Where is Chassis Number in Bajaj Pulsar RS200 ?

Chassis number in Bajaj Pulsar RS200 is right under back seat cover.  To remove the back seat pillow, put key into the lock provided below the seat, turn it and force the back pillow towards handle bars, horizontally. 
3 comments
Read more

How to Set clock or time on Bajaj Pulsar RS200

Hi bikers, Follow below instructions to set time or clock on your pulsar RS200. This may work for NS200, RS400 etc pulsar range bikes. You have to use the M (Mode) and S (Set) buttons to do so. 1. First you need to stop the engine. You can't do this at night as you will need sufficient light to see the dial. Do it during daytime. 2. Press the mode button to select TRIP 1 mode. 3. Press the mode and set button together for more than 3-4 secs. Then the ':' in the clock will stop blinking and HH MM digits will start blinking. 4. Now if you press the mode button, the hour will chance and increment by 1 each time, and pressing the set button will have the same effect on the Minutes. 5. Once the desired time is set, press both the mode and set buttons together for 3-4 secs. This will save the settings and will exit the 'clock mode' 6. P.S: do not touch the throttle till the setting is saved as it is supposed to exit the clock from the set mode without saving th...
9 comments
Read more