Chassis number in Bajaj Pulsar RS200 is right under back seat cover.
To remove the back seat pillow, put key into the lock provided below the seat, turn it and force the back pillow towards handle bars, horizontally.
Hi bikers, Follow below instructions to set time or clock on your pulsar RS200. This may work for NS200, RS400 etc pulsar range bikes. You have to use the M (Mode) and S (Set) buttons to do so. 1. First you need to stop the engine. You can't do this at night as you will need sufficient light to see the dial. Do it during daytime. 2. Press the mode button to select TRIP 1 mode. 3. Press the mode and set button together for more than 3-4 secs. Then the ':' in the clock will stop blinking and HH MM digits will start blinking. 4. Now if you press the mode button, the hour will chance and increment by 1 each time, and pressing the set button will have the same effect on the Minutes. 5. Once the desired time is set, press both the mode and set buttons together for 3-4 secs. This will save the settings and will exit the 'clock mode' 6. P.S: do not touch the throttle till the setting is saved as it is supposed to exit the clock from the set mode without saving th
Excellent
ReplyDeleteWhere is chassis no. Of pulsar as 150
ReplyDeleteIn below speedometer
Delete